Chrysler 300 forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-11 of 11 Results
  1. Chrysler 300 General Discussion
    My wife's 07 300 AWD idle became rough the other day, 13 codes, all to do with the induction system essentially. I pulled the intake This is the before picture. I thoroughly cleaned the intake, pulled the injector assembly and cleaned them thoroughly, cleaned all sensors and actuators...
  2. Chrysler 300 General Discussion
    My wife's 07 300 AWD started idling rough and threw a bunch of codes, so I decided to pull the upper intake. It was nasty inside The airflow sensor on top of the intake was also pretty gummy. I used carb cleaner, engine degreaser and several different brushes to completely clean the butterfly...
  3. Chrysler 300 General Discussion
    Installed the starter in my wife's 07 W.P. Chrysler Signature Edition AWD. was a learning experience to be sure, for anyone who has to do this follow these steps after unhooking negative battery terminal in trunk. 1)Remove heat shield over steering rack two 5/16 screws. 2)Remove steering rod...
  4. Chrysler 300 General Discussion
    removed the starter from my wife's 07 W.P. Chrysler Signature Edition AWD, took me 20 minutes to remove the heat shields, steering rod and drop the rack Then 3 hours to remove the nut holding the battery cable to the solenoid, there was no way to get a socket on it with or without extensions...
  5. Chrysler 300 General Discussion
    What is the most efficient way to remove an 07 3.5L starter, just from looking at it, it looks like remove the air intake tube possibly filter box, remove motor mount heat shield, remove motor mount and get it out. I looked at the Haynes manual instructions and it said something about removing a...
  6. Chrysler 300 General Discussion
    I thought I was dealing with a security system starter disable, but I jumped the starter relay and starter doesn't even make a noise, so I am assuming starter went bad with no warning. So now I have to figure out how to remove the starter with AWD in the way. Drag!!!!
  7. Chrysler 300 General Discussion
    On Tuesday I replaced the transmission fluid and filter in the 07 AWD I bought my wife for Xmas. I drilled and tapped the pan to install a drain plug for ease of maintenance. there were 4 quarts in the bucket after draining, so I put 4 quarts back in. Wednesday I checked the level and it was...
  8. Chrysler 300 General Discussion
    I have now bought 2 300's in the last 8 days, my wife's 07 W.P. Chrysler Signature Edition Touring And my 05 300C 164K miles that exploded a piston and annihilated the corresponding chamber in the head. For $600 it is a heck of a deal, not sure if I will fix it or take what I want and sell it on...
  9. Chrysler 300 General Discussion
    I poured in the quart of Motor Flush at Walmart and let it work on the way home. No sign of pan leaks , oil cooler has been bypassed by coolant system, so must have started leaking at some point Inspected suspension and everything has been changed in the last few thousand miles including half...
  10. Chrysler 300 General Discussion
    After driving my wife's 300 objectively rather than critically (test drive) I have to say I am quite jealous. it must be the AWD, because it rides far more smoothly than my Limited which is saying something. They definitely loaded up the options on this W.P. Chrysler Signature Edition, guess I...
  11. Chrysler 300 For Sale!
    In search of a great condition 2010 300 Touring edition, 3.5L V6, black exterior, any colour leather interior, sunroof, AWD. Motivated buyer. Willing to travel to any location in North America to pick up. Thanks, Adrian Toronto, Canada
1-11 of 11 Results
Top