Chrysler 300 forum banner

suspension

  1. Newbie in Arizona!!!

    Newbie Check In!
    Long time Mopar owner, just traded in a 2011 Dodge Charger, Mopar 11 for a 2016 Chrysler 300S!!! 7 days in, love everything about it except it has a front end vibration at most speeds, worse at highway speed, just had dealer who I bought it from balance and rotate and align, no change!!! Very...
  2. Grinding noise from front end while turning under load

    Chrysler 300 Mechanical Problems and Questions
    Hey guys! The car in question is a 2007 Chrysler 300C (5.7L HEMI, RWD) So this problem just started recently. No work has been done on the front end for over a year (brake pad replacement and sway bar bushing replacement). The car makes a grinding noise when I am turning while accelerating or...
  3. Lowering 300 with 22s?

    Custom Chassis - Suspension - Wheels & Tires
    I am going to get 22s and lower it when i lower it on 22s do i have to roll the fender? What else do i have to do any other mods all i want is 22s and lower it thats it lol and whats the best lowering coilover kit?
  4. Lowering Help!

    Custom Chassis - Suspension - Wheels & Tires
    Hey guys, Ive been reading 300forumz for a while but have never posted anything before. I can't seem to find the answer I am looking for, though, so I figured I could just ask it myself. I have a black 2006 300 Touring that I just ordered 22' Viper Replica wheels and 4 new Hankook Ventus ST...
  5. Lowered 06 300c, need shock advice...

    Custom Chassis - Suspension - Wheels & Tires
    I recently lowered my 06 300c with a set of Tein performance springs. I was told if you lower the car 1 1/2 inches, you can keep the stock shocks...... After the springs settled, I had over a 2 inch drop. Obviously now my ride is very stiff and bumpy, and I need new shocks BAD!!!! What brand...
  6. Pedders LXC Street One

    Custom Chassis - Suspension - Wheels & Tires
    This weekend I'll be ordering the street one package from WretchedMS. Has anyone done this install themsleves, comment on the complexity, or provide torque specs for the bolts? Any comments or questions are welcome. Thanks!!
  7. cracking noise when turning - 300 rwd

    Chrysler 300 Mechanical Problems and Questions
    Hey guys, I have had this problem for at the past couple of months already, it did not happen too often so did not bother me much. Now it's gotten worse, as I expected. Long story short, when I make a full turn to either side, I can sometimes hear a really nasty cracking sound, like some...
  8. Suspension Creaking

    Chrysler 300 Mechanical Problems and Questions
    I have tried to find a good response to this, but nothing has satisfied me. I have an 07 Limited ed. On the drivers side front, if you push down on the hood (compressing the shocks) when it comes back up, it creaks. It also does this on almost a constant basis when driving, and is getting...
  9. Tryna get my C on rails

    Custom Chassis - Suspension - Wheels & Tires
    Okay well i'm starting to look into the whole handling business of the ride... i know when I hit over 70 MPH my car isn't steady at all... so I got some good suggestions on sway bars (thanks DamageInc :smileup:) and i've decided to go with the Hotchkis kit but i also hear or read about a...
  10. Eibach Sportlines = 4x4 no more!

    Custom Chassis - Suspension - Wheels & Tires
    Just installed and off the lift, haven't settled all the way yet. Killed that gap! that's my Dad's base 300 in the back... it's not BB (Midnight Blue close enough), but I'll let him slide! Hankook 275/40/R20, Stonz Rims 9.5" wide ... Sun is going down... MWAHAHAHA! :p:p:p:p:p:p
  11. suspension problem

    Chrysler 300 Mechanical Problems and Questions
    I own a 2008 300 C with 13,900 miles on it in 15 months of driving. I have not done any modifications to this car other than window tint. The other day I noticed the passenger-side front end was sitting lower than the drivers-side; about 1.5 to 2 inches lower. Has anyone experienced a problem...
Top