Chrysler 300 forum banner
1 - 6 of 6 Posts

·
Registered
Joined
·
5 Posts
Discussion Starter · #1 ·
According to Uconnect Customer Service, this is the correct procedure for my Uconnect 3 system I have in my 2014 300C. Has anyone been able to get this Soft Reset procedure to work ? I can't seem to get it to work for me.


  • Park vehicle in safe location and turn it off completely: engine not running, dashboard lights off.
  • Close all doors.
  • Start ACC mode only; do NOT start engine.
    Keyless vehicles: Without touching pedals, press Start button twice.
  • Simultaneously press and hold Phone and VR buttons for 30 seconds, then release.
  • Turn off ACC mode.
  • Open driver door for 30 seconds or until all dashboard indicators go off.
  • Close driver door.
  • Restart vehicle.
  • Test app.
 

·
Registered
Joined
·
5 Posts
Discussion Starter · #2 ·
My issue is that I have a Keyless ignition so when I press the Start button twice I'm in the "Run" Position. How am I supposed to turn ACC mode Off if it was never on ?
 

·
Registered
2020 300S 5.7L, Alloy Edition, Black on Black
Joined
·
53 Posts
According to Uconnect Customer Service, this is the correct procedure for my Uconnect 3 system I have in my 2014 300C. Has anyone been able to get this Soft Reset procedure to work ? I can't seem to get it to work for me.


  • Park vehicle in safe location and turn it off completely: engine not running, dashboard lights off.
  • Close all doors.
  • Start ACC mode only; do NOT start engine.
    Keyless vehicles: Without touching pedals, press Start button twice.
  • Simultaneously press and hold Phone and VR buttons for 30 seconds, then release.
  • Turn off ACC mode.
  • Open driver door for 30 seconds or until all dashboard indicators go off.
  • Close driver door.
  • Restart vehicle.
  • Test app.
This appears to be the identical 'soft reset' procedure for my 2020 300S UConnect 4 Panasonic/Alpine system with Nav. Also got it from UConnect - works on mine. Suspect your unit requires a different procedure. Do beware as there are numerous procedures given on the web/youtube - none worked for me.

I just read over the procedure for my car - make sure UConnect is turned OFF before starting the drill.
 

·
Registered
Joined
·
5 Posts
Discussion Starter · #4 ·
This appears to be the identical 'soft reset' procedure for my 2020 300S UConnect 4 Panasonic/Alpine system with Nav. Also got it from UConnect - works on mine. Suspect your unit requires a different procedure. Do beware as there are numerous procedures given on the web/youtube - none worked for me.

I just read over the procedure for my car - make sure UConnect is turned OFF before starting the drill.
Thank you for telling me to turn uconnect off. I hadn't tried it that way
 

·
Registered
Joined
·
5 Posts
Discussion Starter · #5 ·
This appears to be the identical 'soft reset' procedure for my 2020 300S UConnect 4 Panasonic/Alpine system with Nav. Also got it from UConnect - works on mine. Suspect your unit requires a different procedure. Do beware as there are numerous procedures given on the web/youtube - none worked for me.

I just read over the procedure for my car - make sure UConnect is turned OFF before starting the drill.
R u in run mode or ACC mode? Cause if I hit the start button twice like it says I'll be in run mkde
 
1 - 6 of 6 Posts
Top